Download official Firmware/Flash File for ZTE Yuanhang 30S:
Stock ROM or Firmware refers to the version of the operating system that comes pre-installed on a device by the manufacturer. It is an unmodified version of the Firmware that is distributed with a device and can be used to restore it to its original state.
ZTE Yuanhang 30S Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. for restoring a device to its original configuration. Stock ROMs are often specific to a particular device and are not interchangeable between different devices.
Pre-Requirement’s
- Make a backup before process
- charge the device at least 50% to prevent accidental shut down during the process
Disclaimer:
- flash at own risk
Firmware Information: |
|
|---|---|
| Device Name: | ZTE Yuanhang 30S |
| ROM Type: | Full ROM |
| SoC: | unisoc |
| OS: | Android |
| Password: | Null |
| Root Access: | No |
| Firmware Version: | check below list |
Download Links:
Available firmware:
- MyOS11.5.43MR_7531N_UNI SD Card: Download
How to Install Stock Firmware on ZTE Yuanhang 30S:
- Download and Install SPD Driver on your computer
- Download and Extract Firmware File and Flash tools
- Run SPD Flash tool
- Click load Package
- Now Select Pac file from the downloaded ROM folder
- Click Download/Start Arrow
- Connect Your switched off Phone by pressing volume up & down key
- Wait until success,
- once done, disconnect device & switch it ON
How to Install SD card update:
- move file to device storage & use local updater or stock recovery
Check other articles: