ZTE Blade A3 Prime Flash File Firmware MT6761 10.0

Download Stock Firmware for ZTE Blade A3 Prime:

Official Stock Firmware Flash File Now available for the ZTE Blade A3 Prime & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. by using this firmware you can solve all software Issues on your ZTE Blade A3 Prime such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

ZTE Blade A3 Prime Run on Android 10 and it is Powered by Mediatek MT6761 Processor.  it is single SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI, Bluetooth 3G & 4G. The device come with 3GB of RAM and 32GB of storage that can be expandable via SD card.

Must Require:

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • Fix some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of Board Software

Pre-Requirement’s

  • backup NVRAM using this Guide
  • first make a complete backup of your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: ZTE Blade A3 Prime
Type: Full ROM
Size: up to 1.7GB
SoC: Mediatek MT6761
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: ZTE Z5157V [U.S.A] 394760B0587YH_US_Z5157YV1.0.0B05 [YH_US_Z5157YV1.0.0B05]

Download Links:

File Name Version Downloads
VCOM Driver N/A Download
SP Flash tools V5.2 Download
Firmware File V1.0 Download

updates:

How to Install Stock Firmware on ZTE Blade A3 Prime:

  • Extract downloaded stock firmware..
  • Install Mediatek VCOM driver on Your computer.
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download onlyClick Download & connect Your switched off Phone by pressing volume up & down key.

  • You can see Flashing Process on screen. after complete unplug & switch it On
Read also:

have any issue, Let me know via comment