Download Stock Firmware for ZTE 8012N:
Official Stock Firmware Flash File Now available for the ZTE 8012N & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. by using this firmware you can solve all software Issues on your ZTE 8012N such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
ZTE 8012N Run on Android 10 and it is Powered by Mediatek MT6853 Processor. it is single SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI, Bluetooth 3G & 4G. The device come with 6GB of RAM and 128GB of storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of Board Software
Pre-Requirement’s
- backup NVRAM using this Guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: ZTE 8012N
Type: Full ROM
Size: up to 3.2GB
SoC: Mediatek MT6853
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: 8012N [ hubei ] 400610B1682ZTE_8012N_GENV1.0.0B16 [GEN_CN_P653S06V1.0.0B16]
Download Links:
| File Name | Version | Downloads |
| VCOM Driver | N/A | Download |
| SP Flash tools | V5.2 | Download |
| Firmware File | GEN_CN_P653S06V1.0.0B16 | Download |
How to Install Stock Firmware on ZTE 8012N:
- Extract downloaded stock firmware..
- Install Mediatek VCOM driver on Your computer.
- Download & Extract smartphone Flash tools on your computer
- From the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & connect Your switched off Phone by pressing volume up & down key.
- You can see Flashing Process on screen. after complete unplug & switch it On
Read also:
have any issue, Let me know via comment