Download Stock Firmware Flash File for Yezz Art 1 (ART1B200):
Official Stock Firmware/ Flash File Now available for the Yezz Art 1 & You can download it from below. by using this firmware you can solve all software Issues with in your Yezz Art 1 such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Yezz Art 1 Run on Android 10 and it is Powered by Mediatek MT6739 Processor. it is a dual SIM Smartphone Support nano SIM card, connectivity features Include hotspot, GPS, WIFI & bluetooth. The device come with 3GB of RAM and 32GB of Storage that can be expandable via SD card.
Must Require:
Pre-Requirement’s
- backup NVRAM using this guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Yezz Art 1
Type: Full ROM
Size: up to 1.2GB
SoC: Mediatek
Os: Android 10
Password: Null
Gapps: Included
Root access: Not
Firmware Version: YEZZ_ART+1_Part+number+ART1B200_MT6739_10.0
Download Links:
How to Install Stock Firmware on Yezz Art 1:
- Extract Downloaded firmware.
- Install Mediatek VCOM driver on Your computer.
- Download & extract smartphone Flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)
- flashing Process started. once done, unplug device & switch it ON
Note: if there is no USB device then you have to check for USB driver or try test Point
Read also:
have any issue, Let me know via comment