Xiaomi Redmi Note 11S 5G Flash File (Stock ROM)

Download Stock Firmware Flash File For Xiaomi Redmi Note 11S 5G (OPAL):

Official Stock Firmware Now available for Xiaomi Redmi Note 11S 5G & You can Download it from below. by using this firmware you can solve all software Issues on your Xiaomi Redmi Note 11S 5G such as hang on Logo, frp lock, fastboot Mode, display Blank or White after Flash, dead recovery, dead after flash etc.

Xiaomi Redmi Note 11S 5G Run on Android 11 & it is Powered by Mediatek MT833 Processor. it is a dual SIM Smartphone support Nano GSM SIM cards, connectivity Option’s Include 3G 4G GPS, Wi Fi, bluetooth etc, sensor Include Gyro, Proximity Gravity etc. the device come with 4GB of RAM and 64GB of storage that can be expandable via SD card.

Pre-Requirement’s

  • backup NVRAM using this guide
  • make a complete backup of your device
  • charge the device at least 50% to prevent accidental shut down during the process

Note:

  • The firmware is for Repairing purpose only, You have to manage risk accordingly
  • downgrade via flash tools work’s on Most of devices but I don’t know about this device
  • a customized MTK DA file is Require to bypass ‘Download agent Authentication‘ you can Search our site for custom DA file

Firmware Information:

Device Name: Xiaomi Redmi Note 11S 5G
Type: Full ROM
ROM Size: up to 2-6GB
SoC: Mediatek
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware version: OPALEEA_V13.0.7.0.RGLEUXM

Download Links:

EDL Firmware:
full firmware to Reinstall board software (only for dead and bootloop devices)

Flash Tools:

USB Driver:

How to Flash Xiaomi Redmi Note 11S 5G Via SP Flash tool:

  • Extract Downloaded Stock Firmware..
  • Install Mediatek Vcom driver on Your computer
  • Disable SLA authentication by following this Guide
  • Download & Extract SP Flash tools
  • From flash tool folder, Run flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder
  • follow the same and load DA and Auth file

  • open setting’s and set connect as below image

  • Select Download Only from drop down.
  • Click Download & Connect Your Switched off Phone to computer by using usb cable (usb + volume up + volume down key) if no usb device then you have to do test point

  • You can see a yellow flashing bar, once done it will turn green, disconnect device and switch it ON.
Read also: