Stock ROM or Firmware refers to the version of the operating system that comes pre-installed on a device by the manufacturer. It is an unmodified version of the firmware that is distributed with a device and can be used to restore it to its original state.
Xiaomi Pad 6 Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. for restoring a device to its original configuration. Stock ROMs are often specific to a Particular device and are not interchangeable between different devices.
Note:
- Make a backup before Process
- it will erase all your data Including Internal Storage
Must Require:
Firmware Information: |
|
|---|---|
| Device Name | Xiaomi Pad 6 |
| ROM Type | Full ROM |
| SoC | Qualcomm |
| OS | Android 13xx |
| Password | Null |
| Root Access | No |
| Region | Check below list |
| Firmware Version | Check below list |
Downloads Links:
- V14.0.3.0.TMZINXM | 13.0 IND: Download
- V14.0.5.0.TMZCNXM | 13.0 China: Download
- V14.0.4.0.TMZMIXM | 13.0 Global: Download
- V14.0.2.0.TMZTRXM | 13.0 TURKEY: Download
Flash Tools:
- MI Flash: Download
- Contact Me for root, Region Change, unbrick, repair & frp (Paid)
usb driver:
- QD Loader Driver: Download
How to Flash Xiaomi Pad 6 (Pipa) Via EDL:
- Download and install Mi Flash Tool on your computer. You can download the latest version of Mi Flash Tool from the above download section.
- Download the appropriate Firmware package for your device. Make sure to download the correct firmware package that matches your device model and region
- Extract the firmware package to a folder on your computer
- Install Qualcomm usb driver on your computer, You can download the latest version of qualcomm driver from the above download section.
- Open Mi Flash Tool on your computer.
- Connect your device to your computer using a USB cable. the device must be in 9008 EDL Mod
- In Mi Flash Tool, click on the “SELECT” button and navigate to the folder where you extracted the Firmware package in above step.
- In Mi Flash tool, click on the “REFRESH” button to detect your device.
- Once your device is detected, click on the “Flash” button in Mi Flash Tool to start the firmware flashing process.
- Wait for the firmware flashing process to complete. Do not disconnect your device from the computer during this process.
- Once the firmware flashing process is complete, you will see a “Success” message in Mi Flash Tool. disconnect device & switch it ON.
How to Install recovery ROM:
- enable adb sideload in stock recovery
- send package via adb
adb sideload 'update.zip'
Flashing Recovery ROM via Fastboot:
- extract update rom (payload.bin) using payload dumper
- use fastboot flash in this format
fastboot flash 'partition name' 'filename'
Read also: