Wizphone WP003 Flash File Firmware Free

Download Stock Firmware for Wizphone WP003:

Official Stock Firmware Flash File Now available for the Wizphone WP003 & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. This firmware will solve all software Issues on your Wizphone WP003 such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Wizphone WP003 Run on Android 8.0 & it is powered by Mediatek Processor. it is a a dual SIM smartphone support Nano SIM card, connectivity features Include, hotspot, WIFI, GPS, Bluetooth etc. The device come with 2GB of RAM and 16GB of storage that can be expandable via SD card.

Must Require:

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • Fix some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of Board Software

Pre-Requirement’s

  • backup NVRAM using this Guide
  • first make a complete backup of your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Wizphone WP003
Type: Full ROM
Size: up to 799MB
SoC: Mediatek
Os: Android 8.0
Password: SaifiSolutions
Root access: Not
Gapps: Included
Firmware Version: WP003_8.0.065.P1.200304.WP003.DYKJ_DYKJ_WP003_OE.NOEFUSE

Download Links:

How to Install Stock Firmware on Wizphone WP003:

  • Extract downloaded stock firmware..
  • Install Mediatek VCOM driver on Your computer.
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download onlyClick Download & connect Your switched off Phone.

  • You can see Flashing Process On screen. after complete unplug & switch it on

How to Install CPB Firmware:

  • Download and Extract ROM File and Flash tool.
  • Run YGDP tools and Click Config.
  • Locate .cpb ROM File.. Click Start upgrade

  • as soon as connect Your switched off Phone to computer by together Pressing Volume up and down button
  • Make Sure all Drivers are Installed otherwise it will not work, once done disconnect device and switch it on..
Read also:

have any issue, Let me know via comment