Download Stock Firmware Flash File for Wiko Power U10:
Official Stock Firmware Now available for the Wiko Power U10 & You can download it from below. by using this firmware you can solve all software Issues with in your Wiko Power U10 such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Wiko Power U10 Run on Android 10 and it is Powered by Mediatek MT6765 Processor. it is a dual SIM smartphone Support nano SIM card, connectivity features Include hotspot, GPS, WIFI & bluetooth. The device come with 2GB of RAM and 32GB of Storage that can be expandable via SD card.
Pre-Requirement’s
- backup NVRAM using this guide
- make a complete backup of your device
- charge the device at least 50% to prevent accidental shut down during the process
Note:
- The Firmware is for Repairing purpose only, You have to manage risk accordingly
- downgrade via flash tools work’s on Most of devices but I don’t know about this device.
- A customized MTK DA file is Require to bypass ‘Download Agent Authentication’, you can Search our site for custom DA file.
Firmware Information:
Device Name: Wiko Power U10
Type: Full ROM
Size: up to 1.7GB
SoC: Mediatek MT6765
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version: Wiko_Power_U10_MT6765_EEA_V745_200720_11
Download Links:
How to Install Stock Firmware on Wiko Power U10:
- Download & Extract firmware on your computer
- Install Mediatek VCOM driver on Your computer
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)
- flashing Process started. once done, unplug device & switch it ON
Note: if there is no USB device then you have to check for USB driver or try test Point
Read also:
have any issue, Let me know via comment