Download Stock Firmware/Flash File Walton Primo G7 Plus:
Download Official Stock Firmware Flash File For Walton Primo G7 Plus If you own Walton Primo G7 Plus Smartphone and You want to Download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.
In Some cases We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware anytime. Also if you feel your Walton Primo G7 Plus lag or has an issue, then flash the Stock Firmware From the list below and save from situation. Stock Firmware doesn’t void a warranty on Your Walton Primo G7 Plus.
Walton Primo G7 Plus Smartphone is Run on android 7.0 OS Which is Powered by a Mediatek MT6580 Processor. the Walton Primo G7 Plus is a dual SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G.
Walton Primo G7 Plus Smartphone Come with 2GB of RAM and 16GB of Storage can Be Expandable via SD Card.
Must Require:
Why We Need Stock Firmware?
- to Downgrade a Phone
- to upgrade a Phone
- Fix Some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- Completely Re-Installation of Board Software
Pre-Requirement’s
- backup Your NVRAM using this Guide
- First Make a Complete backup of Your Personal data (if Possible)
- Charge the device at least 50% to prevent accidental shut down during the process
Firmware information:
Device Name: Walton Primo G7 Plus
Type: Full ROM
Size: 1 GB
SoC: Mediatek MT6580
Os: Android 7.0
Password: Null
Root access: Not
Gapps: Included
Firmware Version: Primo_GF7_Plus_Factory_MT6580_70
Download :
- Firmware Walton Primo G7 Plus: Download
Flash Tools:
- SP flash tools 5.2 Here
Driver:
- Mediatek Preloader V-COM Driver Here
How to Install Stock Firmware Flash Walton Primo G7 Plus:
- Extract downloaded stock firmware..
- Install Mediatek Vcom driver on Your computer.
- Download & Extract smartphone Flash tools on computer
- From the flash tool folder Run SP_Flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & Connect Your switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:
So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.