Vonino Pluri M8 2020 Flash File Firmware MT8321 10.0

Download Stock Firmware for Vonino Pluri M8 2020:

Official Stock Firmware Flash File Now available for the Vonino Pluri M8 2020 & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. This firmware will solve all software Issues on your Vonino Pluri M8 2020 such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Vonino Pluri M8 2020 Run on Android 10.0 and it is Powered by Mediatek MT8321 Processor. connectivity features Include, hotspot, WIFI, GPS, Bluetooth etc. The device come with 2GB of RAM and 16GB of Storage that can be expandable via SD card.

Must Require:

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • Fix some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of Board Software

Pre-Requirement’s

  • backup NVRAM using this Guide
  • first make a complete backup of your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name:Vonino Pluri M8 2020
Type: Full ROM
Size: up to 1.1GB
SoC: Mediatek MT8321
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: PluriM8_2020_A10_user_20200703

Download Links:

File Name Version Downloads
VCOM Driver N/A Download
SP Flash tools V5.2 Download
Firmware/Flash File PluriM8_2020_A10_user_20200703 Download

How to Install Stock Firmware on Vonino Pluri M8 2020:

  • Extract downloaded stock firmware..
  • Install Mediatek VCOM driver on Your computer.
  • Download & Extract smartphone flash tools on your computer
  • From the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download onlyClick Download & Connect Your switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:

have any issue, Let me know via comment