Download Stock Firmware for Vonino Magnet M10 2019:
Official Stock Firmware Flash File Now available for the Vonino Magnet M10 2019 & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. This firmware will solve all software Issues on your Vonino Magnet M10 2019 such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Vonino Magnet M10 2019 Run on Android and it is Powered by Mediatek Processor. connectivity features Include, hotspot, WIFI, GPS, Bluetooth etc. The device come with 2GB of RAM and 16GB of Storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of Board Software
Pre-Requirement’s
- backup NVRAM using this Guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Vonino Magnet M10 2019
Type: Full ROM
Size: up to 846MB
SoC: Mediatek
Os: Android
Password: Null
Root access: Not
Gapps: Included
Firmware Version: MagnetM10_MG863_O8321_RB_B18_Inch10_20190228H10
Download Links:
| File Name | Version | Downloads |
| VCOM Driver | N/A | Download |
| SP Flash tools | V5.2 | Download |
| Firmware | MagnetM10_MG863_O8321_RB_B18_Inch10_20190228H10 | Download |
How to Install Stock Firmware on Vonino Magnet M10 2019:
- Extract downloaded stock firmware..
- Install Mediatek VCOM driver on Your computer.
- Download & Extract smartphone Flash tools on your computer
- From the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & Connect Your switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:
have any issue, Let me know via comment