How to unbrick Redmi Note 12 Turbo

unbrick is a process to repair a device that was bricked, with in Redmi Note 12 Turbo user face two type of brick- soft brick and hard brick.

Soft brick: in this stage device stuck or freez on boot logo or animation due to any software/ firmware issue.

hard brick: in this stage device completely goes dead and does not show any sign of boot for example logo or animation, even fastboot or recovery mod. it show only 9008 USB COM driver /device when we connect it to computer

so if your Redmi Note 12 Turbo having any of soft or hard brick issue then you can fix it by following the below Instructions.

Fix Soft brick/ Bootloop (Fastboot)

  • extract firmware
  • connect phone in fastboot mod
  • Now send below code
fastboot –set-active=a
fastboot erase userdata
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash super super.img
fastboot flash vbmeta vbmeta.img

fastboot reboot bootloader

fastboot –set-active=b
fastboot erase userdata
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash super super.img
fastboot flash vbmeta vbmeta.img
fastboot –set-active=a
fastboot reboot

or you can use this tool to automate the process (high success chance)

Fix hard brick (EDL)

  • You have to Contact us for Mi Flash Auth (Paid service), once you have access to Mi Flash tool you can reflash it via EDL Mod.

Requirement’s: