unbrick is a process to repair a device that was bricked, with in Realme X3 user face two type of brick- soft brick and hard brick.
Soft brick: in this stage device stuck or freez on boot logo or animation due to any software/ firmware issue.
hard brick: in this stage device completely goes dead and does not show any sign of boot for example logo or animation, even fastboot or recovery mod. it show only 9008 USB COM driver /device when we connect it to computer
so if your Realme X3 having any of soft or hard brick issue then you can fix it by following the below Instructions.
Disclaimer:
- flash at own risk
Status:
- 100% tested
Preparations:
Download firmware according your region
- Firmware Realme X3: Download
- Note: extract zip and then extract ofp using rom2box or py command lines
Download Require tools:
Download & Install Require USB Driver:
- QCOM USB driver: Download
Process:
- Run ROM2box.exe
- Go to oppo & select Realme X3
- under memory type select ‘ufs’
- under firmware flasher locate Main firmware Images folder
- put Phone to recovery mod, Insert usb cable, multiple times press recovery version from the popup select OK (test point require for dead devices)
- once you see a Port in Port detector click ‘Download’ button.
- wait until success, it will take around 10 Min
- once done, Your device restart itself.. success…
have any question let me know via comment.