unbrick is a process to repair a device that was bricked, with in Poco X5 Pro user face two type of brick- soft brick and hard brick.
Soft brick: in this stage device stuck or freez on boot logo or animation due to any software/ firmware issue.
hard brick: in this stage device completely goes dead and does not show any sign of boot for example logo or animation, even fastboot or recovery mod. it show only 9008 USB COM driver /device when we connect it to computer
so if your Poco X5 Pro having any of soft or hard brick issue then you can fix it by following the below Instructions.
Fix Soft brick/ Bootloop (Fastboot)
- extract firmware
- connect phone in fastboot mod
- Now send below code
fastboot –set-active=a fastboot erase userdata fastboot flash recovery recovery.img fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash super super.img fastboot flash vbmeta vbmeta.img fastboot reboot bootloader fastboot –set-active=b fastboot erase userdata fastboot flash recovery recovery.img fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash super super.img fastboot flash vbmeta vbmeta.img fastboot –set-active=a fastboot reboot
or you can use this tool to automate the process (high success chance)
Fix hard brick (EDL)
- You have to Contact us for Mi Flash Auth, once you have access to Mi Flash tool you can reflash it via EDL Mod.
Requirement’s: