UMIDIGI BISON X10S Firmware Flash File

Download official Firmware/Flash File for UMIDIGI BISON X10S:

official stock Firmware/ Flash File Now available for the UMIDIGI BISON X10S & You can download it from below. by using this firmware you can solve all software Issues with in your UMIDIGI BISON X10S such as hang on Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

UMIDIGI BISON X10S Run on Android 11 and it is Powered by UNISoC tiger T310 Processor. it is a dual SIM smartphone support Nano SIM cards, connectivity Option’s Include GPS, Wi-Fi, hotspot, bluetooth etc. the device come with 4GB of RAM and 64GB of Storage that can be expandable via SD card.

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • fix some serious issue in phone
  • remove FRP Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of board software

Pre-Requirement’s

  • first make a complete backup of your Personal data (if possible)
  • charge the device at least 50% to prevent accidental shut down during the process
Must Require:

Firmware Information:

Device Name: UMIDIGI BISON X10S
Type: Full ROM
ROM Size:
 up to 1.4GB
SoC: UNISoC
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version: UMIDIGI_BISON_X10S_V1-0_20220120

Download Links:

  • SPD tools R24: Download
  • SPD Driver R4.20.0201: Download
  • Firmware file for UMIDIGI BISO X10S EEA: Download
  • Firmware file for UMIDIGI BISON X10S GLO: Download

How to Install Stock Firmware on UMIDIGI BISON X10S:

    1. Download and Install SPD Driver on your computer
    2. Download and Extract Firmware File and Flash tools
    3. Run SPD Flash tool and Click load Package
    4. Now Select Pac file from the downloaded ROM folder
    5. Click Download and connect Your switched off Phone
    6. done

Check other articles: