Download Stock Firmware for Umidigi A9:
Official Stock Firmware Flash File Now available for the Umidigi A9 & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. by using this firmware you can solve all software Issues on your Umidigi A9 such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Umidigi A9 Run on Android 11 and it is Powered by Mediatek helio G25 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI, Bluetooth & 3G. The device come with 3GB of RAM and 64GB of storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of Board Software
Pre-Requirement’s
- backup NVRAM using this Guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Umidigi A9
Type: Full ROM
Size: up to 1.3GB
SoC: Mediatek helio G25
Os: Android 11
Password: Null
Root access: Not
Gapps: Included
Firmware Version: UMIDIGI_A9_V1-0_20210203
Download Links:
File Name | Version | Downloads |
VCOM Driver | N/A | Download |
SP Flash tools | V5.2 | Download |
Firmware Non EU Firmware EU /EEA |
UMIDIGI_A9_V1-0_20210203 UMIDIGI_A9_E_V1-0_20210203 |
Download Download |
How to Install Stock Firmware on Umidigi A9:
- Extract downloaded stock firmware..
- Install Mediatek VCOM driver on Your computer.
- Download & Extract smartphone Flash tools on your computer
- From the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & connect Your switched off Phone by pressing volume up & down key.
- You can see Flashing Process on screen. after complete unplug & switch it On
Read also:
have any issue, Let me know via comment