Download Stock Firmware Flash File for Ulefone Armor X10:
Official Stock Firmware/ Flash File Now available for the Ulefone Armor X10 & You can download it from below. by using this firmware you can solve all software Issues with in your Ulefone Armor X10 such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Ulefone Armor X10 Run on Android 11 and it is Powered by Mediatek MT6761 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI & bluetooth. The device come with 4GB of RAM and 32GB of Storage that can be expandable via SD card.
Must Require:
Pre-Requirement’s
- backup NVRAM using this guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Ulefone Armor X10
Type: Full ROM
Size: up to 2GB
SoC: Mediatek
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version: GQ3099SH2_KSE5T_Ulefone_20220105_V01
Download Links:
How to Install Stock Firmware on Ulefone Armor X10:
- Extract Downloaded firmware.
- Install Mediatek VCOM driver on Your computer.
- Download & extract smartphone Flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)
- flashing Process started. once done, unplug device & switch it ON
Note: if there is no USB device then you have to check for USB driver or try test Point
Read also:
have any issue, Let me know via comment