Download Stock Firmware for Ulefone ARMOR 10 5G:
Official Stock Firmware Flash File Now available for the Ulefone ARMOR 10 5G & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. This firmware will solve all software Issues on your Ulefone ARMOR 10 5G such as hang Logo, frp lock, Fastboot Mode, display Blank or White after Flash, dead recovery, dead after flash etc.
Ulefone ARMOR 10 5G Run on Android 10 and it is Powered by Mediatek MT6873 Processor. it is a dual SIM smartphone support Nano sim card, connectivity options Include, hotspot, WIFI, GPS, Bluetooth 3G & 4G.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of Board Software
Pre-Requirement’s
- backup NVRAM using this Guide
- First Make a complete backup of Your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Ulefone ARMOR 10 5G
Type: Full ROM
Size: up to 1.9GB
SoC: Mediatek MT6873
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: GQ5000AF1_KSA101_Ulefone_20201208_V02
Download Links:
| File Name | Version | Downloads |
| VCOM Driver | N/A | Download |
| SP Flash tools | V5.2 | Download |
Firmware Files:
How to Install Stock Firmware on Ulefone ARMOR 10 5G:
- Extract downloaded stock firmware..
- Install Mediatek VCOM driver on Your computer.
- Download & Extract smartphone Flash tools on your computer
- From the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & Connect Your switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:
have any issue, Let me know via comment