Download Stock Firmware Flash File for TINNO U705AA:
Official Stock Firmware/ Flash File Now available for the TINNO U705AA & You can download it from below. by using this firmware you can solve all software Issues with in your TINNO U705AA such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
TINNO U705AA Run on Android 10 and it is Powered by Mediatek MT6765 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI & bluetooth. The device come with 3/4GB of RAM and 32/64GB of Storage that can be expandable via SD card.
Must Require:
Pre-Requirement’s
- backup NVRAM using this guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: TINNO U705AA
Type: Full ROM
Size: up to 1.5GB
SoC: Mediatek
Os: Android 10
Password: testedflashfile.com
Gapps: Included
Root access: Not
Firmware Version: MT6765__TINNO__U705AA__10__QP1A.190711.020__U705AA
Download Links:
How to Install Stock Firmware on TINNO U705AA:
- Extract Downloaded firmware.
- Install Mediatek VCOM driver on Your computer.
- Download & extract smartphone Flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)
- flashing Process started. once done, unplug device & switch it ON
Note: if there is no USB device then you have to check for USB driver or try test Point
Read also:
have any issue, Let me know via comment