Tecno Spark 8T KG6P Flash File Firmware Free

Download Stock Firmware Flash File for Tecno Spark 8T KG6P:

Official Stock Firmware/ Flash File Now available for the Tecno Spark 8T KG6P and You can download it from below. by using this firmware you can solve all software Issues with in your Tecno Spark 8T KG6P such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Tecno Spark 8T Run on Android 11 and it is Powered by Mediatek MT6765 Processor. it is a dual SIM Smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI bluetooth 3G and 4G. The device come with 4GB of RAM and 64GB of storage that can be expandable via SD card.

Must Require:

Why We Need Stock Firmware?

  • to downgrade a device
  • to upgrade a device
  • Fix some serious issue in device
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on a device
  • completely Re-Installation of board software

Pre-Requirement’s

  • backup NVRAM using this guide
  • first make a complete backup of your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Tecno Spark 8T KG6P
Type: Full ROM
Size: up to 3.3GB
SoC: Mediatek MT6765
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version: KG6p-H6511AB-R-GL-211221V518

Download Links:

How to Install Stock Firmware on Tecno Spark 8T KG6P:

  • Extract Downloaded firmware.
  • Install Mediatek VCOM driver on Your computer.
  • Download & extract smartphone Flash tools on your computer
  • from the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and load scatter file from ROM folder

  • select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)

  • flashing Process Started. once done, unplug device & switch it ON

Note: if there is no USB device then you have to check for USB driver or try test Point

How to Flash Tecno Spark 8T KG6P Via Tecno Flash tool:

  • Download & Extract Firmware
  • Download & Extract tecno flash tool
  • Install Mediatek VCOM driver on Computer
  • open the tecno flash tool directory and open the ‘Sowtwaredownloadv4‘ folder and Right-Click on ‘SWD_AfterSales.exe‘ and select ‘run as administrator’ click ‘Yes’ wait for the program to Load
  • click on grey ‘Settings icon’ on the top-Left corner of the screen.
  • In the Popup Click load & Select  MT6XX_Android_scatter.txt File From Firmware Folder
  • Connect Your Switched of phone to Computer by Pressing volume up & down Key
  • Click on Green ‘Start Icon’ on the top-left corner of the screen, Now Flashing will Started with a blue Status bar

  • Once done, flashing bar will turn Green, now disconnect your phone from your computer & Switch it ON.
Read also:

have any issue, Let me know via comment