Download Stock Firmware for Tecno Pop 4 Pro:
Official Stock Firmware Flash File Now available for the Tecno Pop 4 Pro & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box.
Tecno Pop 4 Pro Run on Android 10 and it is Powered by Mediatek MT6739 Processor. it is a dual SIM (GSM) Smartphone that support Nano-SIM card. connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM 3G & 4G.
Must Require:
Why We Need Stock Firmware?
- to Downgrade a Phone
- to upgrade a Phone
- Fix Some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- Completely Re-Installation of Board Software
Pre-Requirement’s
- backup Your NVRAM using this Guide
- First Make a Complete backup of Your Personal data (if Possible)
- Charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Tecno Pop 4 Pro
Type: Full ROM
Size: up to 1.5GB
SoC: Mediatek MT6739
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: BC3-BC3ABC-QGo-OP-200825V016
Download Links:
| File Name | Version | Downloads |
| VCOM Driver | N/A | Download |
| SP Flash tools | V5.2 | Download |
| Firmware/Flash File | BC3-BC3ABC-QGo-OP-200825V016 | Download |
How to Install Stock Firmware Tecno Pop 4 Pro:
- Extract Downloaded Stock Firmware..
- Install Mediatek Vcom driver on Your computer.
- Download & Extract Smartphone Flash tools on computer
- From the Flash tool Folder Run SP_Flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download Only. Click Download & Connect Your Switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:
So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.