How to Install Stock Firmware on Tecno Phantom 9

Download Stock Firmware/Flash File Tecno Phantom 9:

Download Official Stock Firmware Flash File For Tecno Phantom 9 If you own Tecno Phantom 9 Smartphone and You want to Download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Tecno Phantom 9 lag or has an issue, then flash the Stock Firmware From the list below and save from situation. Stock Firmware doesn’t void a warranty on Your Tecno Phantom 9.

Tecno Phantom 9 Run on android 9.0 OS Which is Powered by Mediatek MT6765 Processor. it is a Dual SIM (GSM) Smartphone that accepts Nano-SIM. Connectivity options Include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G.

The Device Come with 6GB of RAM and 128GB of Storage Can be Expandable via SD Card. In Camera Department it Come with 16+8+2MP Rear Camera with a 32MP Front Shooter.

Note:

flashing the ROM will erase all Your Personal data Including storage. so we advice You to First Make a complete backup of your Phone.
Please do carefully, we are not responsible for any damage to your device.
Must backup NVRAM using this guide before doing anything.
Ensure that Your Device at-least 50% charge during flashing Process to Prevent accidental Shut Down.

Must Require:

Firmware Information:

Product name: Tecno Phantom 9
Type: Full ROM
Size: up to 1.2GB
SoC: Mediatek MT6765
Os: Android 9.0
Password: Null
Root access: Not
Gapps: Included
Product Version: AB7-H618A-P-190419V148

Download Links:

Firmware Tecno Phantom 9: Download

Flash Tools:

SP flash tools 5.2 Here

Driver:

Mediatek Preloader V-COM Driver Here

How to Install Stock Firmware Flash Tecno Phantom 9:

First of all Download and Install Mediatek Vcom Driver on Your PC.
Download & Extract SP Flash tools Inside a Folder. Run SP Flash tools.exe
Go to Download tab Click Scatter and Load Scatter File from ROM Folder

Select Download Only. Click Download & Connect Your Switched off Phone.

You can see Flashing Process On Screen. after Complete unplug & Switch it ON

How to Flash using Tecno Flash tools

Download & Extract Firmware
Download & Extract tecno flash tool
Install Mediatek VCOM driver on Computer
open the tecno flash tool directory and open the ‘Sowtwaredownloadv4‘ folder and Right-Click on ‘SWD_AfterSales.exe‘ and select ‘run as administrator’ click ‘Yes’ wait for the program to Load
click on grey ‘Settings icon’ on the top-Left corner of the screen.
In the Popup Click load & Select MT6XX_Android_scatter.txt File From Firmware Folder
Connect Your Switched of phone to Computer by Pressing volume up & down Key
Click on Green ‘Start Icon’ on the top-left corner of the screen, Now Flashing will Started with a blue Status bar

Once done, flashing bar will turn Green, now disconnect your phone from your computer & Switch it on.

Read also:

So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.