Tecno IN6 Tested Flash File tecno Camon I Click

Download IN6-H633A Flash File tecno Camon I Click-

Download official Stock ROM firmware for tecno Camon I Click in the article you Will Learn How to Install stock ROM/flash file on tecno Camon I Click.  if you own a tecno Camon I Click smartphone and want to Install Stock Rom/ firmware on it to unbrick or fix bootloop issue then you are on Correct Place, in The article we Share a Step by Step Guide to Install Stock Firmware on tecno Camon I Click.

In Some cases We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware anytime. Also if you feel your tecno Camon I Click lag or has an issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your tecno Camon I Click.

Note-

1. This Guide is work on Listed Devices only. So Please Don’t try it on any other Phone.
2. Flashing The ROM by Flash tools will Erase all Your Data. So create a backup of your Personal data before Flashing, [if possible]
3. Please Do carefully, We are Not Responsible for any damage, bootloop, or dead SD card’s.
4. Ensure that your Device at-least 50% charge During Flashing Process,to Stop the Accidentally Switch off.
5. Follow all steps correctly otherwise it cause bootloop.
6. Must backup NVRAM using this Guide before Doing anything.

Must Require:

1. backup NVRAM
2. backup Your Personal data
3. Create a nandroid backup

Firmware Information-

Device Name tecno Camon I Click
OS android 8.XX
Chipset Mediatek Helio P23
language Multi Language
Root access Not Rooted
Gapps Included

Require tools and Files-

Download 

  • Tecno Camon i Click Firmware IN6-H633A:

    Type: ROM Size: 1.7GB
    SoC: Mediatek Helio P23
    Product Name: IN6
    Os: Android 8.1.0 (Oreo)
    Password: romprovider.com
    Download: Mediaifre /Mirror

    Tools:

    • SP flash tools 5.2 Here

    Driver: 

    • Mediatek Preloader V-COM Driver Here

How to Flash tecno Camon I Click-

Step 1- First of All Download SP flash tools and Extract Inside a Folder, you can Extract in C drive for batter work.

Step 2- Download and install Vcom Driver In your PC, This is a must requirement of SP flash tools Flashing, without the Driver you can’t Flash the Device.

Step 3- after That Download official Firmware File, Select your Device From Drop Down menu and Download Rom.

Step 4- Extract Download Rom file Inside a Folder, you can Extract on the Desktop for batter navigations.

Step 5- Go to SP Flash tools Folder and Run’Flash tools.exe’ File.

Step 6- Navigate the Download tab and then Click over Load Scatter File, a pop up is now opened, navigate Scatter File From Downloaded Rom folder and Click OK.

Step 7- Check Everything,[ in custom Recovery case Check Recovery only, and then hit over the Download.
Step 8- As soon as connect your Switched off phone to your PC via usb cable, and wait for Success, after Some time a green circle is appear.Done.