Download Stock Firmware Flash File for Tecno Camon 16 CE7:
Latest Firmware Flash File Now available for the Tecno Camon 16 CE7 & You can Download it From Below. The Firmware come in Scatter format Which Can be Flash either with SP Flash tool or Miracle box. You can use it to unbrick Your device.
Tecno Camon 16 CE7 Run on Android 10 & it is Powered by Mediatek helio G70 Processor. it is a Dual SIM (GSM) Smartphone that Support Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM 3G & 4G.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- Completely Re-Installation of Board Software
Pre-Requirement’s
- backup Your NVRAM using this Guide
- First Make a Complete backup of Your Personal data (if Possible)
- Charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Tecno Camon 16 CE7
Type: Full ROM
Size: up to 2.8GB
SoC: Mediatek helio G70
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: Tecno_Camon_16_CE7_MT6768_V303_200922
Download Links:
| File Name | Version | Downloads |
| VCOM Driver | N/A | Download |
| SP Flash tools | V5.2020 | Download |
| Firmware/ Flash File | Tecno_Camon_16_CE7_MT6768_V303_200922 | Download |
How to Install Stock Firmware on Tecno Camon 16 CE7:
- Extract Downloaded Official Stock ROM..
- Install Mediatek Vcom Driver on Your PC.
- Download & Extract SP Flash tools, Run SP Flash tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download Only. Click Download & Connect Your Switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & Switch it On
How to Flash Tecno CE7 using Tecno Flash tools:
- Install Mediatek driver on computer
- From the Tecno Flash tool folder Run SWD_AfterSales.exe
- click on grey ‘Settings icon’ on the top-Left corner of the screen.
- In the Popup click load & Select MT6XX_Android_scatter.txt File From Firmware Folder
- Connect Your switched of phone to computer by Pressing volume up & down Key
- Click on Green ‘Start Icon’ on the top-left corner of the screen, Now flashing will started with a blue Status bar
- Once done, flashing bar will turn Green, now disconnect your phone from your computer & switch it on.
Read also:
So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.