Teclast M50 Pro M4P1 Firmware Flash File (Stock ROM)

Download the Teclast M50 Pro M4P1 stock firmware from romprovider. here we share Full OTA and PAC firmware for the Teclast M50 Pro M4P1, which can be used to fix the issues such as FRP lock, bootloop, stuck at logo & dead boot. Note that stock ROMs are device-specific and are not interchangeable between different devices.

The Teclast M50 Pro M4P1 runs on Android 13 operating system, powered by a Unisoc T618 Processor. Connectivity options include GPS, Wi-Fi, Bluetooth etc. Sensors include gyroscope, proximity, gravity, etc.

Pre-Requirement’s

  • Make a backup before process
  • charge the device at least 50% to prevent accidental shut down during the process

Disclaimer:

  • flash at own risk
Firmware Information:
Device Name: Teclast M50 Pro M4P1
ROM Type: Full ROM
SoC: unisoc t610
OS: Android 13xx

Download Links

Available Firmware

Advantage of Stock Firmware:

  • fix software issue
  • unbrick, bootloop fix
  • dead boot repair
  • pattern, pin password lock bypass
  • frp bypass/ google gmail account lock bypass

HOW TO INSTALL STOCK FIRMWARE ON Teclast M50 Pro M4P1

  • Download and Install SPD Driver on your computer
  • Download and Extract Firmware File and Flash tools
  • Run SPD Flash tool

  • Click load Package & Select Pac file from the downloaded ROM folder

  • Click Download/Start Arrow

  • Connect Your switched off Phone by pressing volume up & down key
  • Wait until success

  • once done, disconnect device & switch it ON
Related