Download Stock Firmware for Teclast D4C5/D4C6:
Official Stock Firmware Flash File Now available for the Teclast D4C5/D4C6 & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. This firmware will solve all software Issues on your Teclast D4C5/D4C6 such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Teclast D4C5/D4C6 Run on Android 5.1 and it is Powered by Mediatek MT8163 Processor. connectivity features Include, hotspot, WIFI, GPS, Bluetooth & 3G etc. The device come with 1GB of RAM and 8GB of storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of Board Software
Pre-Requirement’s
- backup NVRAM using this Guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Teclast D4C5/D4C6
Type: Full ROM
Size: up to 670MB
SoC: Mediatek MT8163
Os: Android 5.1
Password: Null
Root access: Not
Gapps: Included
Firmware Version: Pluri_M8_MG863_tb8321p2_bsp_RB_B18_2019.2.17
Download Links:
| File Name | Version | Downloads |
| VCOM Driver | N/A | Download |
| SP Flash tools | V5.2 | Download |
| Firmware D4C5 Firmware D4C6 |
P80h (D4C5)-Android5.1-V1.00-1AC0 P80H (D4C6)-Android5.1-V1.11-5B4C |
Download Download |
How to Install Stock Firmware on Teclast D4C5/D4C6:
- Extract downloaded stock firmware..
- Install Mediatek VCOM driver on Your computer.
- Download & Extract smartphone Flash tools on your computer
- From the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & Connect Your switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:
have any issue, Let me know via comment