Download Stock Firmware Flash File for TCL 9027W:
Official Stock Firmware Now available for the TCL 9027W & You can download it from below. by using this firmware you can solve all software Issues with in your TCL 9027W such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
TCL 9027W Run on Android 8.1 and it is Powered by Mediatek MT6739 Processor. connectivity features Include hotspot, GPS, WIFI & bluetooth. The device come with 2GB of RAM and 16GB of Storage that can be expandable via SD card.
Pre-Requirement’s
- backup NVRAM using this guide
- make a complete backup of your device
- charge the device at least 50% to prevent accidental shut down during the process
Note:
- The firmware is for Repairing purpose only, You have to manage risk accordingly
- downgrade via flash tools work’s on Most of devices but I don’t know about this device
- a customized MTK DA file is Require to bypass ‘Download agent Authentication‘ you can Search our site for custom DA file
Firmware Information:
Device Name: TCL 9027W
Type: Full ROM
Size: up to 2GB
SoC: Mediatek MT6739
Os: Android 8.1
Password: Null
Gapps: Included
Root access: Not
Firmware Version: TCL_9027W_MT6739_A3A_8_4G_TMO_220115_8.1.0
Download Links:
How to Install Stock Firmware on TCL 9027W:
- Download & Extract firmware on your computer
- Install Mediatek VCOM driver on Your computer
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select Download only. Click Download
- connect Your switched off Phone to computer by using usb cable (USB +Volume up and down key) (make sure all driver are installed, if no usb VCOM device then you have to do test point)
- flashing Process started. once done, unplug device & switch it ON
Read also:
have any issue, Let me know via comment