Download Official Pie update for Samsung Galaxy J7 Pro SM-J730F:
Download & Install Official Android 9.0 Pie update on Samsung SM-J730F, Here we Share latest Android 9.0 Pie Firmware update for Samsung SM-J730F Which Will update Your Phone to Latest Android 9.0 OS, Android 9.0 Pie update for Samsung SM-J730F available via OTA You Can Check it on Settings/about_Phone/update Section, If You have not Yet Receive then you can Manually update it by Following the Below Instructions.
Samsung SM-J730F Run on android 7.0 OS Which is Powered by Exynos 7870 Processor. it is a Dual SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM. Connectivity options Include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G and 4G.
Samsung SM-J730F Come with 3GB of RAM and 32/64GB of Storage can be expandable via SD Card. in Camera Department it Come with 13MP Dual Rear Camera With 13MP Front Shooter.
Note-
1. Flashing the ROM Will erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
2. Please Do carefully, We are Not Responsible for any Damage to Your Device.
3. Must backup NVRAM using this Guide before Doing anything.
4. Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:
1. backup NVRAM
2. Create a nandroid backup
3. backup Your Personal data
Firmware Information:
Product name: Samsung SM-J730F
Type: Full ROM
Size: 2GB
SoC: Exynos 7870
Os: Android 9.0
Password: Null
Root access: Not
Gapps: unknown
Regions: N/A
PDA: Below
Download’s:
Firmware:
- Spain: SM-J730F_J730FXXU4CSF1_J730FOXA4CSEE_PHE_9.0_5
- South africa: J730FXWU4CSF5_J730FOJV4CSEI_XFE_9.0_5
- Poland: SM-J730F_J730FXXS5CSF5_J730FXEO5CSF5_XEO_5
Flash Tools:
- odin Here
Driver:
- Driver Here
How to Install Android 9.0 Pie Firmware on Samsung SM-J730F:
1) Download tools and Combination ROM From above. Then Extract odin and ROM File.
2) Install Samsung Driver on PC. Run Odin.exe From tool Folder.
3) Now Reboot Phone to Download Mod and Connect to PC with usb
4) You can see added msg. Make sure that only these two options are tick “Auto Reboot” and “F.Reset Time“ Make sure re-partition is Not checked.
5) Now Extract & Load Full Firmware under AP, BL, CP and HOME_CSC Section and Click Start/Download
6 ) Wait untilSuccess/ Done.
Read also:
So this is a Complete Guide to Download Firmware and Flash This Device. if You have any question Let Me Know via Comment.