How to Root Tecno Pova Neo 5G

Rooting is the way to obtain Supersu Right’s on a Android device, that means after Rooting the Phone you have (sudo) full Right to perform any system task.

Tecno Pova Neo 5G Run on Android 12 and it is Powered by Mediatek MT6853 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity Option’s Include GPS, WIFI, hotspot, bluetooth 3G 4G etc. the device come with 4GB of RAM and 128GB of storage that can be expandable via SD card.

Requirement:

Note:

  • all userdata will be erased, must make a backup before process
  • Must write vbmeta.img after unlocking bootloader
  • if the device has a vendor_boot partition patch & flash it too
  • we strongly suggest below method (boot.img dump) because boot.img from a different firmware version may cause bootloop
  • the boot image is NOT the bootloader image. do not confuse between them flashing the wrong image to bootloader could brick your device

How to Root Tecno Pova Neo 5G:

  • Install USBDK and Mediatek driver on Your computer
  • Download & Extract ROM2box
  • Run ROM2Box.exe
  • Click Mediatek/Firmware Reader!
  • mark “Full Firmware”
  • click ‘START’ button
  • Once the process Started, turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
  • done, it will take 15-20Min
  • Move boot.bin or boot_a.bin (rename it boot.img) from ROM2box/out folder to your phone
  • on Phone Install Magisk Manager

  • Now patch boot.img using Magisk and Move back it to computer, Platform tools or ROM2box folder
  • copy empty vbmeta from rom2box folder to patched boot folder
  • Open CMD on same folder & send below code
fastboot set_active a
fastboot flash boot 'patched filename'
fastboot set_active b
fastboot flash boot 'patched filename'
fastboot flash vbmeta vbmeta.img.empty
fastboot set_active a
fastboot reboot

done, Your have successfully root your phone.

Note:

  • avoid any slot error in cmd and execute all command one by one, make sure bootloader is unlocked..
  • if any error in fastboot you can write patched boot.img using rom2box
Related: