How to Root Cubot X90, Root Your Cubot X90 using Magisk, this will open up a wide range of options, from personalising your phone to improving it’s performance. However, it’s essential to proceed with caution, as rooting involves risks and could void your warranty. In this guide, we’ll walk you through the process step by step in simple terms.
The Cubot X90 runs on Android 14 operating system, powered by a Mediatek helio G99 Processor. it is a dual sim smartphone that accept dual nano sim card. connectivity Options include, 4G, GPS, Wi-Fi, Bluetooth, etc. Sensors include gyroscope, proximity, gravity, etc.
What is Rooting?
Rooting is the process of gaining full administrative control over your Android device. It allows you to access system files and make changes that are otherwise restricted by the manufacturer.
Pre-Requirement’s:
- backup important data
- charge your device
- unlock the bootloader by following official method or dm me
- Download Require Files:
- Magisk Manager
- Firmware File Cubot X90
- Contact Me to unlock bootloader, root, region change, unbrick, frp & unlock (Paid)
Step by Step Guide to Root Cubot X90
Download the Latest Firmware:
- first download Cubot X90 firmware from above links
- Note: firmware version you download must match the version currently installed on your Cubot X90. Mixing different firmware versions can lead to unexpected issues and may compromise the rooting process. if the firmware version is different you must flash the firmware first.
Extract and Move Boot.img:
- Extract the downloaded zip file. Here are the Instructions to extract encrypted firmware
- Move the boot.img from the Firmware folder to your phone.
Install Magisk Manager:
- Install Magisk Manager on your device
Patch the boot.img:
- Launch Magisk Manager.
- Click ‘Install’ and choose the patch file.
- Select & patch a File, Locate the boot.img and initiate the patching process.
Transfer Patched File to PC:
Once the patching is complete, move the patched file to PC > Storage/Download/Magisk-patched.img.
Enable USB Debugging and OEM Unlock:
- On your phone, enable USB debugging and OEM unlock from the Developer Options.
Connect Phone to Computer in Bootloader Mode:
- Connect your phone to the computer in bootloader mode.
Flash Patched File:
- Open the command prompt in the platform tool folder
- enter below command to flash rooted file:
fastboot flash boot 'filename'
Reboot Your Phone:
after flashing, reboot your device by sending below command
fastboot reboot
Completion:
Congratulations! Your Cubot X90 is now successfully rooted.
Related: