RMX2040 Realme Narzo 10 Flash File Firmware No Auth Free

Download Stock Firmware /Flash File For RMX2040 Realme Narzo 10:

official Stock Firmware Flash File Now available for the Realme Narzo 10 & You can Download it From below. The ROM come in Oppo Flash package You need a Authorized Oppo ID to Flash it by using the oppo Download tools Which is Included along with the Firmware.

Realme Narzo 10 Run on Android 10.0 & it is Powered by Mediatek helio G80 Processor. it is a Dual SIM (GSM and GSM) Smartphone Support Nano-SIM Cards. Connectivity options include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM, 3G and 4G.

The device  come with 4GB of RAM and 128GB of Storage Can be Expandable via SD Card. in camera department it Come with 48+8+2+2MP Rear Camera With 16MP Front Shooter.

Note:

  • Flashing the ROM will erase all Your Personal Data including Storage. So we advice You to First Make a Complete backup of Your Phone.
  • Please Do carefully, We are Not Responsible for any Damage to Your Device.
  • Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:

Firmware Information-

Device Name: Realme Narzo 10
Type: Full ROM
ROM Size: up to 12GB
SoC: Mediatek Helio G80
Os: Android 10
Password: Null
Gapps: Included
Root access: Not
Firmware Version: RMX2040_11_A.17_200512

Download Links:

Firmware:

Flash Tools:

usb Driver: 

How to Install Official Firmware on Realme Narzo 10:

  • unpack downloaded Firmware using this tool
  • then disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Install Mediatek Vcom driver on Your computer.
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run Flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • select download only. Click Download & Connect Your switched off Phone.

  • You can see flashing Process on screen. after complete unplug & switch it on

How to Flash/unbrick Realme Narzo 10 Via Oppo Download tool:

  • Extract ROM File & Download tool in same Folder
  • Now Install correct driver on PC
  • connect Phone to PC with USB
  • Run Download tool. it will automatically load the Firmware if not then select ofp firmware and then and click start. wait until flashing complete, done. unplug Phone and bootup.

Fixes & Solutions:

if there was a flashing error untick below Listed Partition in SP flash tools

  • opporeserve2
  • cdt_engineering
  • md1mg
Related:

have any question Let me know via Comment.