(Begonia) Redmi Note 8 Pro test Point Pinout

Redmi Note 8 Pro to Recovery Fastboot & VCOM/Flashing Mod:

Step by Step Guide to Boot Redmi Note 8 Pro to Recovery,fastboot & VCOM Mod, if You own a Redmi Note 8 Pro Smartphone and Want to boot it in Recovery Fastboot & VCOM Mod then You Can Do it by Following the Below Instructions.

The Redmi Note 8 Pro Run on android 9.0 & it is Powered by Mediatek MT6785 Processor. it is a Dual SIM Smartphone Support Nano GSM SIM Card, Connectivity Option’s Include 3G 4G, GPS, Wi Fi, Bluetooth etc, Sensor include Goryo Proximity Gravity etc.

Redmi Note 8 Pro Come with 6GB of RAM and 128GB Storage Can be Expandable via SD Card. in Camera Department the Device Come with 64+8+2+2MP Rear Camera With 20MP Front Shooter.

Reboot Xiaomi Redmi Note 8 Pro to Recovery Mod:

Steps:
  1. Switch Off Phone.
  2. Once off together Press the Power and volume up button.
  3. once the Device Logo appear Release the Button.
  4. After This Simply Wait for the time till Your device boots into the Recovery Mode.

Reboot to Recovery using adb.

adb reboot recovery

How to Reboot Redmi Note 8 Pro to Fastboot Mod:

Steps:
  • Switch Off Phone.
  • Once off, together Press the Power and Volume down button.
  • This Will turn the Device on and You need to hold both the buttons till the Device logo Disappears.
  • After this, Simply Wait for the time till your device boots into the Fastboot Mode.

Reboot to bootloader using adb.

adb reboot bootloader

How to Boot Redmi Note 8 Pro to VCOM/ Flashing Mod:

Method 2:

  • Install Mediatek Driver on PC
  • Remove back Cover of Phone
  • Find out The Pinout as Show In Image
  • Connect Phone to PC with usb Cable
  • take a Coper Wire and Short that Pinout