Download Stock Firmware Flash File For Xiaomi Redmi 9 Prime:
Official tested Flash File Firmware Now available for Xiaomi Redmi 9 Prime and You can Download it From below. with the help of this firmware you can solve all software Issues on your Xiaomi Redmi 9 Prime such as hang on Logo, frp lock, Fastboot Mode, display Blank or White after Flash, dead recovery, dead after flash etc.
Xiaomi Redmi 9 Prime Run on Android 10 & it is Powered by Mediatek Helio G80 Processor. it is a Dual SIM Smartphone Support Nano GSM SIM Cards, connectivity Option’s Include 3G 4G, GPS, Wi Fi, Bluetooth etc, sensor Include Goryo Proximity Gravity etc. The device come with 4GB of RAM and 64GB storage that can be expandable via SD card. in camera department it come with 13+8+5+2MP Rear camera with 8MP front shooter.
Note:
- Must Make a backup of Your Personal data.
- it will erase all your data Include Personal information.
- Make Sure Your Phone Have at least 40-50% Charge to Prevent accidental Shut down.
Must Require:
Firmware Information:
Device Name: Xiaomi Redmi 9 Prime
Type: Full ROM
ROM Size: up to 2.8GB
SoC: Mediatek helio G80
Os: Android 10
Password: Null
Gapps: Included
Root access: Not
Firmware version: V12.0.1.0.QJCINXM
Download Links:
EDL Firmware:
full firmware to Reinstall board software (only for dead and bootloop devices)
- V12.0.2.0.RJCEUXM EEA Stable: Download
- V12.5.1.0.RJCINXM India Stable: Download
- V12.0.6.0.QJCCNXM China Stable: Download
- V12.0.2.0.RJCMIXM Global Stable: Download
- V12.0.1.0.QJCTRXM Turkey Stable: Download
- V11.0.5.0.QJCRUXM Russia Stable: Download
- V12.0.2.0.QJCIDXM Indonesia Stable: Download
Full OTA/Recovery Updates:
to upgrade a working phone (first check Installed firmware version with in your Phone)
Flash Tools:
- MI Flash: Download
- SP Flash tool: Download
- Mi Flash Require Authorized MI Account or SP Flash tool Require custom da file.
USB Driver:
- Mediatek USB Driver: Download
How to Flash Xiaomi Redmi 9 Prime Via SP Flash tool:
- First Disable SLA Authentication by following this Guide
- Extract downloaded Stock Firmware..
- Install Mediatek Vcom driver on Your PC.
- Download & Extract SP Flash tools, Run SP Flash tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download Only. Click Download & Connect Your Switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & Switch it on
Read also: