Stock ROM or Firmware refers to the version of the operating system that comes pre-installed on a device by the manufacturer. It is an unmodified version of the firmware that is distributed with a device and can be used to restore it to its original state.
Redmi 10 Power Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. for restoring a device to its original configuration. Stock ROMs are often specific to a Particular device and are not interchangeable between different devices.
Note:
- make a backup before Process
- it will erase all your data Including Internal Storage
Must Require:
Firmware Information: |
|
|---|---|
| Device Name | Redmi 10 Power |
| ROM Type | Full ROM |
| SoC | Qualcomm |
| OS | Android 11xx |
| Password | Null |
| Root Access | No |
| Region | Check below list |
| Firmware Version | Check below list |
Downloads Links:
EDL / Fastboot Firmware:
- V13.0.8.0.RGEINXM | 11.0 IN: Download
- V13.0.1.0.SGEINXM | 12.0 IND: Download
- V13.0.6.0.RGEEUXM | 11.0 EEA: Download
EEA:
- V13.0.3.0.SGEEUXM | 12.0: Download
Russia:
INDONESIA:
GLOBAL:
- V13.0.13.0.RGEMIXM | 11.0: Download
- V13.0.2.0.SGEMIXM | 12.0: Download
- V13.0.12.0.RGEMIXM | 12.0: Download
TURKEY:
Flash Tools:
- MI Flash: Download
- Contact Me for Mi Flash tool Login Password, Auth, Region Change, unbrick, frp & Mi account remove (Paid)
usb Driver:
- QD Loader Driver: Download
How to Flash Redmi 10 Power Via MI Flash:
- Download and install Mi Flash Tool on your computer. You can download the latest version of Mi Flash Tool from the above download section.
- Download the appropriate Firmware package for your Xiaomi device. Make sure to download the correct firmware package that matches your device model and region
- Extract the Firmware package to a folder on your computer
- Install Qualcomm usb driver on your computer, You can download the latest version of qualcomm driver from the above download section.
- Open Mi Flash Tool on your computer.
- Connect your Xiaomi device to your computer using a USB cable. the device must be 9008 EDL Mod
- In Mi Flash Tool, click on the “Select” button and navigate to the folder where you extracted the Firmware package in above step.
- In Mi Flash tool, click on the “REFRESH” button to detect your device.
- Once your device is detected, click on the “Flash” button in Mi Flash Tool to start the firmware flashing process.
- Wait for the firmware flashing process to complete. Do not disconnect your device from the computer during this process.
- Once the firmware flashing process is complete, you will see a “Success” message in Mi Flash Tool. disconnect device & switch it ON.
Read also: