unbrick is a process to repair a device that was bricked, with in Realme GT Neo 2 user face two type of brick- soft brick and hard brick.
Soft brick: in this stage device stuck or freez on boot logo or animation due to any software/ firmware issue.
hard brick: in this stage device completely goes dead and does not show any sign of boot for example logo or animation, even fastboot or recovery mod. it show only 9008 USB COM driver /device when we connect it to computer
so if your Realme GT Neo 2 having any of soft or hard brick issue then you can fix it by following the below Instructions.
Requirement’s
- Laptop, PC
- unbrick tool: Download
- QCOM 9008 USB driver: Download
- Firmware Realme GT Neo 2: Download
- contact Me here if bricked & need remote help
Note:
- don’t try on working phone, must make a qcn or efs backup otherwise very difficult to repair IMEI
Steps to unbrick Realme GT Neo 2:
- Download unbrick tool from above
- Install qcom 9008 usb driver on your computer
- Run tool
- Connect Phone in EDL Mod
- once COM detected mark Method 1 & click Connect loader button
- under the Firmware Flash locate extracted ofp Firmware
- Click ‘FIRMWARE FLASH‘
- wait until success, done
How to bypass Pattern Lock on Realme GT Neo 2:
- Download unbrick tool from above
- Install qcom 9008 usb driver on your computer
- Run tool
- Connect Phone in EDL Mod
- once COM detected mark Method 1 & click Connect loader button
- then Click ‘Factory Reset‘
- once done disconnect device, press all three button for 1 Min
have any question Let Me know Via comment.