Download Realme 9 Pro+ Free Fire Edition RMX3393 Flash File Firmware Free:
official Stock Firmware Flash File Now available for the Realme 9 Pro+ Free Fire Edition & You can download it from below. by using this firmware you can solve all software Issues with in your Realme 9 Pro+ Free Fire Edition such as hang on Logo, frp lock, fastboot Mode, display Blank or White after Flash, dead recovery, dead after flash etc.
Realme 9 Pro+ Free Fire Edition Run on Android & it is Powered by Mediatek Processor. it is a dual SIM (GSM and GSM) smartphone support Nano-SIM cards. connectivity options Include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM 3G 4G & 5G. The device come with 8GB of RAM and 128GB of Storage that can be expandable via SD card.
Note:
- it will erase all Your Personal data Including Internal storage. so we advice you to first Make a complete backup of your Phone.
- Please do carefully, we are Not responsible for any damage to Your device.
- ensure that Your device at-least 50% charge to Prevent accidental shut down.
Must Require:
Firmware Information:
Device Name: Realme 9 Pro+ Free Fire Edition
Type: Full ROM
ROM Size: up to 4-8GB
SoC: Mediatek
OS: Android
Password: Null
Gapps: Included
Root access: Not
Firmware Version: RMX3393_11_A.05_2022031417280147
Downloads Links:
EDL Firmware:
full firmware to reinstall board software (only for dead and bootloop devices)
- RMX3393GDPRcomp_11_A.05_2022031417400137 EU: Download
- RMX3393exportcomp_11_A.05_2022031417280147 GLO: Download
Flash tools:
usb Driver:
How to Install Stock Firmware on Realme 9 Pro+ Free Fire Edition:
- unpack downloaded firmware using this tool
- Install Mediatek VCOM driver on Your computer
- Disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
- Download & Extract smartphone Flash tools on your computer
- From the flash tool folder Run Flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & Connect Your switched off Phone.
- Flashing Process started. once done unplug device & switch it ON
Note: if there is no usb device, then check for usb driver or try test Point method
How to Flash/unbrick Realme 9 Pro+ Free Fire Edition Via Oppo Download tool:
- Extract ROM File & Download tool in same Folder
- Now Install correct driver on PC
- connect Phone to PC with USB
- Run Download tool. it will automatically load the Firmware if not then select ofp firmware and then and click start. wait until flashing complete, done. unplug Phone and bootup.
Fixes & Solutions:
if there was a flashing error untick below Listed Partition in SP flash tools
- opporeserve2
- cdt_engineering
- md1mg
Related: