How to Properly unlock bootloader on Realme 3 Pro

Unlock bootloader Realme 3 Pro:

Step by Step Guide to unlock bootloader on Realme 3 Pro. if you own Realme 3 Pro Smartphone then You can unlock it’s bootloader using the below Instructions.

The Realme 3 Pro Run on Android 9.0 Powered by QCOM SD 710 Processor. it Come with 4GB of RAM and 64GB of Storage with hybrid SIM Connectivity.in Camera Department it Support 16+5 MP Dual Rear Camera With Sony IMX519 Camera Sensor.

Note:

  • Your Phone will be Erased with Internal Storage during the unlocking so Must Make a backup before Process
  • Charge it at-least 60% to prevent accidental Shut Down During the unlocking Process.

Related:

What does Mean unlocked bootloader on Realme 3 Pro:

it Mean bootloader is unlockable. it’s Not Pre unlocked We Need to unlock it by Following the Below Instructions.

Requirements:

Steps to unlock bootloader on Realme 3 Pro:

1. Enable Developer Option From Settings, To Enable the Developer Option, Go to your Settings -> About -> Software Information -> More -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled

2. Go back to settings -> Now you need to enable the USB Debugging by going to Settings -> Developer Option and USB Debugging and oem unlock.

3. Download and Extract Provided Platform tools on Your PC.

4. Now Reboot Your Phone to Fastboot Mod by holding Power and volume down Button. When You see fastboot Logo Then connect it to PC.

5. Now Go to the folder where You have extracted the Platform tools and CTRL+Right Click and Select Open CMD here

6. Now type below Code to unlock bootloader

fastboot boot_unlock_verify
if ok
fastboot flashing unlock

7. Look on Phone you can See a unlock Warning Press Volume up button to Confirm unlock

8. Then Reboot System Now With below Code.

fastboot reboot

9. Your Phone now unlocked You Can Install Desire Firmware on it.