Download Stock Firmware for Pixus Touch 3G:
Official Stock Firmware Flash File Now available for the Pixus Touch 3G & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. This firmware will solve all software Issues on your Pixus Touch 3G such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Pixus Touch 3G Run on Android 10 and it is Powered by Mediatek MT8321 Processor. connectivity features Include hotspot, GPS, WIFI, Bluetooth & 3G. The device come with 2GB of RAM and 16GB of storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of Board Software
Pre-Requirement’s
- backup NVRAM using this Guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Pixus Touch 3G
Type: Full ROM
Size: up to 1.3GB
SoC: Mediatek MT8321
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: K706.Q0.V9.33.2.RC-V01.B125H.Low_.2G_20200617
Download Links:
File Name | Version | Downloads |
VCOM Driver | N/A | Download |
SP Flash tools | V5.2 | Download |
Firmware File | V01 | Download |
How to Install Stock Firmware on Pixus Touch 3G:
- Extract downloaded stock firmware..
- Install Mediatek VCOM driver on Your computer.
- Download & Extract smartphone Flash tools on your computer
- From the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & connect Your switched off Phone by pressing volume up & down key.
- You can see Flashing Process on screen. after complete unplug & switch it On
Read also:
have any issue, Let me know via comment