Download Firmware for Pixus Blast:
Official Stock Firmware Flash File Now available for the Pixus Blast & You can Download it From Below. Official Stock Firmware for Pixus Blast Will help You to Restore Your Bricked device. the Firmware come in Scatter format Which Can be Flash either with SP Flash tool or Miracle box.
Pixus Blast Run on Android 8.0 & it is Powered by Mediatek MT6797 Processor. it is a Dual SIM (GSM) Smartphone that Support Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM 3G.
Must Require:
Why We Need Stock Firmware?
- to Downgrade a Phone
- to upgrade a Phone
- Fix Some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- Completely Re-Installation of Board Software
Pre-Requirement’s
- backup Your NVRAM using this Guide
- First Make a Complete backup of Your Personal data (if Possible)
- Charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Pixus Blast
Type: Full ROM
Size: up to 1.3GB
SoC: Mediatek MT6797
Os: Android 8.XX
Password: Null
Root access: Not
Gapps: Included
Firmware Version: X970_6797_8.0_3-32_34PI_FHD_2385-8024_20200414
Download Links:
| File Name | Version | Downloads |
| VCOM Driver | N/A | Download |
| SP Flash tools | V5.2020 | Download |
| Firmware | X970_6797_8.0_3-32_34PI_FHD_2385-8024_20200414 | Download |
How to Install Stock Firmware on Pixus Blast:
- Extract Downloaded Official Stock ROM..
- Install Mediatek Vcom Driver on Your PC.
- Download & Extract SP Flash tools, Run SP Flash tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download Only. Click Download & Connect Your Switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:
So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.