Download Stock Firmware for Panasonic Eluga Ray 610:
Official Stock Firmware Flash File Now available for the Panasonic Eluga Ray 610 & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. This firmware will solve all software Issues on your Panasonic Eluga Ray 610 such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Panasonic Eluga Ray 610 Run on Android 9.0 and it is Powered by Mediatek MT6762 Processor. it is a dual SIM smartphone support Nano SIM card. connectivity features Include, hotspot, WIFI, GPS, Bluetooth & 3G etc. The device come with 3GB of RAM and 32GB of storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of Board Software
Pre-Requirement’s
- backup NVRAM using this Guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Panasonic Eluga Ray 610
Type: Full ROM
Size: up to 1.4GB
SoC: Mediatek MT6762
Os: Android 9.0
Password: Null
Root access: Not
Gapps: Included
Firmware Version: EB-90S62E61v1005
Download Links:
| File Name | Version | Downloads |
| VCOM Driver | N/A | Download |
| SP Flash tools | V5.2 | Download |
| Firmware Flash File | EB-90S62E61v1005 | Download |
How to Install Stock Firmware on Panasonic Eluga Ray 610:
- Extract downloaded stock firmware..
- Install Mediatek VCOM driver on Your computer.
- Download & Extract smartphone Flash tools on your computer
- From the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & Connect Your switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:
have any issue, Let me know via comment