Oppo Reno 6 Pro CPh2247 Flash File Firmware Free Download:
official Stock Firmware Flash File Now available for the Oppo Reno 6 Pro & You can download it from below. by using this firmware you can solve all software Issues with in your Oppo Reno 6 Pro such as hang on Logo, frp lock, fastboot Mode, display Blank or White after Flash, dead recovery, dead after flash etc.
Oppo Reno 6 Pro 5G Run on Android 11 & it is Powered by Mediatek Dimensity 1200 Processor. it is a dual SIM (GSM and GSM) smartphone support Nano-SIM cards. connectivity options Include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM 3G & 4G. The device come with 12GB of RAM and 256GB of Storage that can be expandable via SD card.
Note:
- it will erase all Your Personal data Including Internal storage. so we advice you to first Make a complete backup of your Phone.
- Please do carefully, we are Not responsible for any damage to Your device.
- ensure that Your device at-least 50% charge to Prevent accidental shut down.
Must Require:
Firmware Information:
Device Name: Oppo Reno 6 Pro
Type: Full ROM
ROM Size: up to 12GB
SoC: Mediatek
OS: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version: CPH2247_11_A.11_2021063002190282
Downloads Links:
EDL Firmware:
full firmware to reinstall board software (only for dead and bootloop devices)
- CPH2247_11_A.11_2021063002190282: Download
OTA Updates:
to upgrade a working phone (first check Installed firmware version with in your Phone)
- CPH2247_11_A.11_2021063002190282: Download
Flash tools:
usb Driver:
How to Install Stock Firmware on Oppo Reno 6 Pro:
- unpack downloaded Firmware using this tool
- then disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
- Install Mediatek Vcom driver on Your computer.
- Download & Extract smartphone Flash tools on your computer
- From the flash tool folder Run Flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & Connect Your switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & switch it on
How to Flash/unbrick Oppo Reno 6 Pro Via Oppo Download tool:
- Extract ROM File & Download tool in same Folder
- Now Install correct driver on PC
- connect Phone to PC with USB
- Run Download tool. it will automatically load the Firmware if not then select ofp firmware and then and click start. wait until flashing complete, done. unplug Phone and bootup.
Related: