Oppo Reno 5 Pro 5G Scatter Firmware Free

Download Scatter Firmware for Oppo Reno 5 Pro 5G:

Official Stock Firmware Flash File Now available for the Oppo Reno 5 Pro 5G & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. by using this firmware you can solve all software Issues on your Oppo Reno 5 Pro 5G such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc. The method we share below is allow you to flash your device without authorized oppo ID or account.

Oppo Reno 5 Pro 5G Run on Android 11 and it is Powered by Mediatek Dimensity 1000 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI & Bluetooth. The device come with 8/12GB of RAM and 128/256GB of storage that can be expandable via SD card.

Must Require:

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • Fix some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of board software

Pre-Requirement’s

  • backup NVRAM using this Guide
  • first make a complete backup of your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Oppo Reno 5 Pro 5G
Type: Full ROM
Size: up to 3.8GB
SoC: Mediatek Dimensity
Os: Android 11
Password: Null
Root access: Not
Gapps: Included
Firmware Version: CPH2201_11_A.06_202101272245

Download Links:

How to Flash Oppo Reno 5 Pro 5G without authorized account:

  • Download & extract all above files on your computer
  • Install Mediatek driver on your computer
  • Install Python on your computer
  • You need to do as in the screenshot

  • Run CMD and type below code
python -m pip install pyusb pyserial json5

  • on Phone Press Vol+ & connect it to the PC
  • Go to the bypass tool folder
  • Launching brom.bat
  • Close Window & Open the SP Flash tool folder
  • on SP Flash tool Click Options > Options > connection and make the settings as in the screenshot (UART Connection mode)

  • open flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder
  • under Download Agent load DA File (we Provide)

  • From the drop down Select Download only.
  • Click Download & connect Your switched off Phone by pressing volume up & down key.

  • You can see Flashing Process on screen. after complete unplug & switch it On
  • done
Read also:

have any issue, Let me know via comment