How to Install Stock Firmware on Oppo F7

Download official Firmware/Flash File Oppo F7-

Download official Stock ROM firmware for Oppo F7, in the article we share latest Firmware for  Oppo F7. if you own a Oppo F7 smartphone and want to Install Stock ROM/ firmware on it to unbrick or fix bootloop issue then You can Download latest Firmware for it, in The article We Share Step by Step Guide to Install Stock Firmware on Oppo F7.

The Oppo F7 is a smartphone which is Run on Android 8.XX OS and Powered by a QCOM  Processor, the Oppo F7  is a Dual sim Smartphone that accept 2 Regular SIM card, connectivity Option’s include 3G  4G, GPS, Wi Fi, Bluetooth etc, Sensor include Goryo proximity Gravity etc.

In some cases we have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware anytime. Also if you feel your Oppo F7  lag or has an issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your Oppo F7.

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • Fix Some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • Completely Re-Installation of Board Software

Pre-Requirement’s

  • First Make a complete backup of Your Personal data (if Possible)
  • Charge the device at least 50% to prevent accidental shut down during the process

Downloads Links:

EDL Firmware:
full firmware to reinstall board software (only for dead and bootloop devices)

Flash tools:

usb Driver: 

How to Install Stock Firmware on Oppo F7:

  • unpack downloaded Firmware using this tool
  • Install Mediatek Vcom driver on Your computer
  • Disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Download & Extract smartphone flash tools on your computer
  • from the flash tool folder Run Flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • on SP flash tool Setup Connection Like below Images
  • Click Options > Options > connection and make the settings as in the screenshot (UART connection mode)

  • Select Download only. Click Download & Connect Your switched off Phone to computer by pressing volume up and down key (make sure all driver are installed, if no usb VCOM device then you have to do test point)

  • You can see Flashing Process On Screen. after Complete unplug & switch it on

How to Flash/unbrick Oppo F7 Via Oppo Download tool:

  • Extract ROM File & Download tool in same folder
  • Now Install VCOM driver on PC
  • connect Phone to computer in this way USB+ Volume up+ Volume down key (make sure all driver are installed, if No USB VCOM device then you have to do test point)
  • Run Download tool. it will automatically load the Firmware if not then select ofp firmware and then and click start. wait until flashing complete, done. unplug Phone and bootup.

Related: