Oppo CPH2241 Firmware Flash File No Auth

Download Scatter Firmware for Oppo CPH2241:

Official Stock Firmware Flash File Now available for the & You Oppo CPH2241 can download it from below. by using this firmware you can solve all software Issues on your Oppo CPH2241 such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc. The method we share below is allow you to flash your device without authorized oppo ID or account.

Oppo CPH2241 Run on Android 10 and it is Powered by Mediatek MT6765 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI & Bluetooth. The device come with 4GB of RAM and 64/128GB of storage that can be expandable via SD card.

Must Require:

Why We Need Stock Firmware?

to downgrade a Phone
to upgrade a Phone
Fix some serious issue in phone
Remove FRP, Pattern and Pin lock
fix bootloop and software issue on Phone
completely Re-Installation of board software

Pre-Requirement’s

backup NVRAM using this Guide
first make a complete backup of your Personal data (if Possible)
charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Oppo CPH2241
Type: Full ROM
Size: up to 3.1GB
SoC: Mediatek MT6765
Os: Android 10
Password: Download
Root access: Not
Gapps: Included
Firmware Version: CPH2241_11_A.11

Download Links:

VCOM Driver: Download
SP Flash tool V5.2: Download
bypass tool & driver: Download
Firmware Oppo CPH2241 Scatter: Download

How to Flash Oppo CPH2241 without authorized account:

Download & extract all above files on your computer
Install Mediatek driver on your computer
Install Python on your computer
You need to do as in the screenshot

Run CMD and type below code

python -m pip install pyusb pyserial json5

Download this file Install and run https://sourceforge.net/projects/libusb-win32/files/libusb-win32-releases/1.2.6.0/libusb-win32-devel-filter-1.2.6.0.exe/download
Run LIBUSB Win32 filter Installer and from the driver section Select Mediatek and Click Install

on Phone Press Vol+ & connect it to the PC
Go to the bypass tool folder
Launching brom.bat
Close Window & Open the SP Flash tool folder
on SP Flash tool Click Options > Options > connection and make the settings as in the screenshot (UART Connection mode)