Oppo A83 Scatter Firmware Flash File Free Download

Download Scatter Firmware for Oppo A83 CPH1729:

Official Stock Firmware Flash File Now available for the Oppo A83 & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. by using this firmware you can solve all software Issues with in your Oppo A83 such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc. The method we share below is allow you to flash your device without authorized oppo ID or account.

Oppo A83 Run on Android 7.1 and it is Powered by Mediatek MT6763 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI & Bluetooth. The device come with 2/3/4GB of RAM and 16/32/64GB of storage that can be expandable via SD card.

Must Require:

Why We Need Stock Firmware?

to downgrade a Phone
to upgrade a Phone
Fix some serious issue in phone
Remove FRP, Pattern and Pin lock
fix bootloop and software issue on Phone
completely Re-Installation of board software

Pre-Requirement’s

backup NVRAM using this Guide
first make a complete backup of your Personal data (if Possible)
charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Oppo A83
Type: Full ROM
Size: up to 2.45GB
SoC: Mediatek MT6763
Os: Android
Password: mrtokey
Root access: Not
Gapps: Included
Firmware Version: A83_CPH1729_11_A.25_3G190328_a82c3dab

Download Links:

VCOM Driver: Download
SP Flash tool V5.2: Download
bypass tool & driver: Download
Firmware Oppo A83 Scatter: Download
Reset Pattern FRP Scatter Free : Download

How to Flash Oppo A83 Without authorized account:

Download & extract all above files on your computer
Install Mediatek driver on your computer
Install Python on your computer
You need to do as in the screenshot

Run CMD and type below code

python -m pip install pyusb pyserial json5

Download this file Install and run https://sourceforge.net/projects/libusb-win32/files/libusb-win32-releases/1.2.6.0/libusb-win32-devel-filter-1.2.6.0.exe/download
Run LIBUSB Win32 filter Installer and from the driver section Select Mediatek and Click Install

on Phone Press Vol+ & connect it to the PC
Go to the bypass tool folder
Launching brom.bat
Close Window & Open the SP Flash tool folder
on SP Flash tool Click Options > Options > connection and make the settings as in the screenshot (UART Connection mode)