CPH2179PU Oppo A15s Scatter Firmware No Auth free

Download Scatter Firmware for CPH2179PU Oppo A15s:

Official Stock Firmware Flash File Now available for the Oppo A15s & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. by using this firmware you can solve all software Issues with in your Oppo A15s such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc. The method we share below is allow you to flash your device without authorized oppo ID or account.

Oppo A15s Run on Android 10 and it is Powered by Mediatek MT6765 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI & Bluetooth. The device come with 4GB of RAM and 64GB of Internal storage that can be expandable via SD card.

Must Require:

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • Fix some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of board software

Pre-Requirement’s

  • backup NVRAM using this Guide
  • first make a complete backup of your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Oppo A15s
Type: Full ROM
Size: up to 8GB
SoC: Mediatek MT6765
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: CPH2179PU_11_A.17_201228_8cedfeaf

Download Links:

  • VCOM Driver: Download
  • SP Flash tool V5.2: Download
  • bypass tool & driver: Download
  • Scatter Firmware Oppo A15s (Pass- admin@92): Download
  • (Optional) Oppo A15s OFP Flash File firmware Free: Download

Note: any issue untick these Partition: logo,dtbo,tee1,tee2,lk

How to Flash Oppo A15s Without authorized account:

  • Download & extract all above files on your computer
  • Install Mediatek driver on your computer
  • Install Python on your computer
  • You need to do as in the screenshot

  • Run CMD and type below code
python -m pip install pyusb pyserial json5

  • on Phone Press Vol+ & connect it to the PC
  • Go to the bypass tool folder
  • Launching brom.bat
  • Close Window & Open the SP Flash tool folder
  • on SP Flash tool Click Options > Options > connection and make the settings as in the screenshot (UART Connection mode)

  • open flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder
  • under Download Agent load DA File (we Provide)

  • From the drop down Select Download only.
  • Click Download & connect Your switched off Phone by pressing volume up & down key.

  • You can see Flashing Process on screen. after complete unplug & switch it On
  • done
Read also:

have any issue, Let me know via comment