Nokia TA-1046 Firmware Flash File

Download Stock Firmware/Flash File For Nokia TA-1046:

Download Official Stock Firmware Flash File For Nokia TA-1046. If You own Nokia TA-1046 Smartphone and You want to download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.

Nokia TA-1046 Run on Android 8.0 OS & it is Powered by QCOM SD 660 Processor. it is a Dual SIM Smartphone Support Nano SIM Cards, Including all other Connectivity Features Like Bluetooth hostpot & WIFI.

The Device Come with 4GB of RAM and 64GB of Storage Can Be Expandable via SD Card. in the Camera Department it Come with 12+13MP Rear Camera With a 16MP Front Shooter.

Note-

  • Flashing the ROM Will erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
  • Please Do carefully, We are Not Responsible for any Damage to Your Device.
  • Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:

Firmware Information:

Device Name: Nokia TA-1046
Type: Full ROM
ROM Size: up to 2.3GB
SoC: QCOM SD 660
Os: Android
Password: Null
Gapps: Included
Root access: Not
Firmware version: TA-1046_132E-0-00WW-B07_17032018_NB0

Download Links:

Firmware:

  • TA-1046_132E-0-00WW-B07_17032018_EDL: Download
  • If your Nokia TA-1046 comes with Android 9 Pre-installed, you will not be able to downgrade to Android 8.X.

Flash Tools:

usb Driver: 

How to Install Via QFIL:

  • Download & Extract QFIL tools.
  • Download & Extract Firmware Package.
  • Install QD Loader usb Driver on PC
  • Connect Phone to PC & Reboot to EDL use code Via adb: adb reboot edl
  • You Can usb Driver Like below Image in Device Manager

  • Run QFIL and Load Programmer and XML Files From ROM Folder
  • Click Download

  • Wait until Success. Your Phone Rebooted…

How to Install Via OST:

  • Download and Install usb Driver From above
  • Download and Extract ROM File and Flash tools From above
  • Install OST tools. and Patched Files.
  • Connect Phone to PC & Run OST tools
  • Click Select Software image and locate the Extracted Firmware file

  • Click Next/Download . wait until Flashing done..Disconnect the device and turn it ON.