Motorola XT2013-1-DS Firmware Flash File (Stock ROM)

Download Motorola XT2013-1-DS Firmware Flash File:

Official Stock Firmware Flash File Now available for Motorola XT2013-1-DS & You can download it from below. by using this firmware you can solve all software Issues with in your Motorola XT2013-1-DS such as hang on Logo, frp lock, Fastboot Mode, display blank or white after Flash, dead recovery, dead after flash etc.

Motorola XT2013-1-DS Run on Android 9.0 & it is Powered by Exynos 9609 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include GPS WIFI hotspot Bluetooth 3G & 4G. The device come with 4GB of RAM and 128GB of Storage that can be expandable via SD card.

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • Fix Some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of board software

Pre-Requirement’s

  • First Make a complete backup of Your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Motorola XT2013-1-DS
Type: Full ROM
Size: up to 2-5GB
SoC: Exynos 9609
Os: Android 11
Password: Null
Root access: Not
Gapps: Included
Carrier: Check Below List
Firmware Version: TROIKA_RSBS31.Q1-48-36-15

Download Links:

  •  Vivo – Brazil – Brazil – UMTS_LTE (11.0) : Download

Flash Tools:

usb Driver: 

How to Install Stock Firmware on Motorola XT2013-1-DS:

  • Download & Extract Firmware & RSD Lite tool
  • Install RSD Lite and usb driver on computer
  • after extracting the Firmware you will see an XML file “XXX” then open the file with notepad. Remove all lines with the word “getvar” there were two lines that have the word “getvar”, then save. (Note: Skip if No getvar)
  • Open RSD Lite, Press the “…” Next to the Filename. Find and select the XML file that has been edited in step No.3
  • Reboot phone to bootloader by pressing volume down & power key
  • Connect Phone to computer by using the usb cable
  • Click Download/start, wait until done. once done unplug Phone and switch it ON
Read also:

LEAVE A REPLY

Please enter your comment!
Please enter your name here

2 × 3 =