Download Stock Firmware/Flash File Yuho H1:
Download Official Stock Firmware Flash File For Yuho H1. If you have Yuho H1 Smartphone and You want to download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.
In Some cases We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware anytime. Also if you feel Your Yuho H1 lag or has an issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your Yuho H1.
Yuho H1 Smartphone is Run on Android 6.0 Which is Powered by a Mediatek Processor. the Yuho H1 is a Single SIM (GSM) smartphone that accepts Nano-SIM and Nano-SIM. Connectivity options include, Bluetooth,, USB OTG, FM, and 4G.
The Yuho H1 smartphone is come with 2GB of RAM and 16GB of Storage can be expandable via SD card.
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of Board Software
Note:
- it will erase all user data
- charge the device to prevent accidental shut down
- Wrong flashing may brick your phone, Please Read Instructions carefully
Pre-Requirement’s
- First make a complete backup of your personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information-
Device Name: Yuho H1
Type: Full ROM/Line brush
ROM Size: up to 1 GB
SoC: Mediatek
Os: Android 6.0
Password: null
Gapps: Included
Root access: Not
Firmware version: YUHOH1_6.0.081.P1.1805211741.H1.RWTX_UCT_H1
Download Links:
- Firmware Yuho H1 : Download
Flash Tools:
- QIKU Here
USB Driver:
- MTK Driver Here
How to Install Stock Firmware Flash Yuho H1:
- Download and Extract ROM File and Flash tool.
- Run YGDP tools and Click Config.
- Locate .cpb ROM File.. Click Start upgrade
- as soon as connect Your switched off Phone to computer by together Pressing volume up and down button
- make sure all drivers are Installed, otherwise it will not work, once done disconnect device and switch it on..
Read also: