Download Stock Firmware Flash File for Infinix Zero X Pro X6811:
Official Stock Firmware Flash File Now available for the Infinix Zero X Pro X6811 & You can download it from below. by using this firmware you can solve all software Issues on your Infinix Zero X Pro X6811 such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Infinix Zero X Pro X6811 Run on Android 11 and it is Powered by Mediatek helio G95 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI, bluetooth 3G & 4G. the device come with 8GB of RAM and 128GB of storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of board software
Pre-Requirement’s
- backup NVRAM using this guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Infinix Zero X Pro X6811
Type: Full ROM
Size: up to 4.2GB
SoC: Mediatek
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version: Infinix_X6811-H857AC-R-GL-210818V813
Download Links:
- VCOM Driver: Download
- SP Flash tool V5.2 Download
- Firmware Infinix Zero X Pro X6811: Download
- Contact Me for Auth, unbrick, FRP, Reset, Region Change & root (paid)
How to Install Stock Firmware on Infinix Zero X Pro X6811:
- Extract downloaded stock firmware..
- Install Mediatek VCOM driver on Your computer.
- Download & Extract smartphone Flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select Download only. Click Download & connect Your switched off Phone to PC by Pressing volume up & down key.
- You can see Flashing Process on screen. after complete unplug & switch it ON
How to Flash Infinix Zero X Pro X6811 Via Tecno Flash tool:
- Download & Extract Firmware
- Download & Extract tecno flash tool
- Install Mediatek VCOM driver on Computer
- open the tecno flash tool directory and open the ‘Sowtwaredownloadv4‘ folder and Right-Click on ‘SWD_AfterSales.exe‘ and select ‘run as administrator’ click ‘Yes’ wait for the program to Load
- click on grey ‘Settings icon’ on the top-Left corner of the screen.
- In the Popup Click load & Select MT6XX_Android_scatter.txt File From Firmware Folder
- Connect Your Switched of phone to Computer by Pressing volume up & down Key
- Click on Green ‘Start Icon’ on the top-left corner of the screen, Now Flashing will Started with a blue Status bar
- Once done, flashing bar will turn Green, now disconnect your phone from your computer & Switch it ON.
Read also:
have any issue, Let me know via comment